Arduino Ethernet with Power-over-Ethernet (PoE) Module + USB-to-Serial Adapter Board Review
Arduino Ethernet with Power-over-Ethernet (PoE) Module + USB-to-Serial Adapter Board Feature
- Includes Power-over-Ethernet (PoE) Module
- Includes USB-to-Serial Adapter Board
- Includes a handy Cana Kit General Assembly Guide
Arduino Ethernet with Power-over-Ethernet (PoE) Module + USB-to-Serial Adapter Board Overview
The Arduino Ethernet is a microcontroller board based on the Arduino Uno incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller.It can be programmed like an Uno via a six-pin FTDI-style serial connector. The Arduino USB-to-Serial adapter (included) or any FTDI-style USB-to-serial connector can be used to program it.
A separate power-over-Ethernet (PoE) module is soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.
This bundle includes the USB-to-Serial Adapter Board.
The USB-to-Serial Adapter bBoard converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer.
It features the Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The USB Serial module has an ISCP interface, allowing you to reprogram the chip when placed in DFU mode.
The pinouts on the connector are compatible with a standard FTDI header.
Available at Amazon
Related Products
- Wall Adapter Power Supply - 9VDC 650mA
- Box for Arduino
- Solder Sucker
- Elenco 350 Piece Pre-formed Jumper Wire Kit
Customer Reviews
*** Product Information and Prices Stored: Apr 22, 2012 08:15:10
